0

Your Cart is Empty

OVERNIGHTER Racing Handlebar Bag 6 Litre

The Overnighter Racing Handlebar Bag is a Cradle and Dry Bag combination engineered for carrying tents and other camping equipment on the front of your bike.  The Dry Bag is constructed from weather proof 1oz Dyneema. The 6.1 litre chamber has a roll top closure at each end allowing easy and convenient access to your contents at your destination. Securing the Dry Bag to the handlebars is the Cradle component. An outer shell of VX21 covers the Polypropylene base, this provides a firm and compliant housing for the Dry Bag. Access to the Cradle is located at the rear leaving the front shielded from spray from the front tyre. A reflective panel shielded with 1oz Dyneema is discreetly positioned across the front.   The Cradle straps run the full circumference of the bag offering additional carrying opportunities. Closed finger loops on these straps make it easier to tension. The Overnighter is fitted with shock cord stabilisers to lock the Dry Bag in place and reduce any lateral movement, a head tube mount and spacer adds to this. Handlebar mounts are secured with a tension lock system. These straps are threaded onto our BLOC Spacers bringing the bag away from the bars slightly and offering more options for your thumb position. A shock cord assembly across the top is suitable for holding lightweight footwear or a jacket. Please note that this products performance is directly effected by its load. We recommend using the bags full internal carrying capacity for the best results. Dimensions: 380mm width x 150mm diameter  Total Weight: 293 grams Volume: 6.1 Litres This OVERNIGHTER Racing Handlebar Bag is Manufactured to order in Melbourne Australia, please check our current production lead times.
Read More
reflective

Reflective

Stabilised

Light Weight

Weather Resistant

Australian Made

Specs
  • Weather Resistant XPAC VX21 shell.
  • 0.6mm Polypropylene Main Wall.
  • 1oz Dyneema Dry Bag with dual side opening.
  • Shock Cord side stabilisers.
  • Top Panel Shock Cord Assembly.
  • Low profile Nylon Handlebar Mounts with Step Lock fastener.
  • 1 pair of 15mm BLOC Handlebar Bag Spacers.
  • Shock Cord Head Tube mount with BLOC Spacer.
  • Weight: 293g.
  • Dimensions: 380mm width x 150mm diameter 
  • Volume: 6.1 Litres
  • Grams Per Litre: 48
Installation
Returns and Exchanges

Hassle Free Returns for unused items. Contact us for more information. Please see the full Returns, Exchange and Cancelations policy here.

Dimensions
Care Instructions

If you can't get your skingrowsback product looking good with a simple hose down we recommend hand washing with a mild detergent if required, dry in the shade only.

Do not machine wash, machine dry, or iron. Avoid pressure washing and drying in direct sun light.

Here are some useful suggestions for maintaining your skingrowsback product. Even though the slightly over engineered nature of these products will mean they last a long time a couple of basic rules to follow will keep them lasting even longer.

Washing.

When it comes to washing there are two ways you can approach this. Primarily for our on bike products the most effective way is to use a hose to remove the bulk of the dirt and mud. Try to avoid using a pressure washer as this can do more harm than good. Different colours will have different results, the brighter the colour the more difficult it will be to keep clean for obvious reasons.

If the product you are washing has a stiff component to it please DO NOT wash it in the washing machine, this will cause the structure to be compromised. These products include:

Little Lunch Handlebar Bag

Lunchbox Handlebar Bag

Wide Boy Handlebar Bag

Amigo Top Tube Bag

Hot Dog Top Tube Bag

Hot Dog XL Top Tube Bag

Taquito Top Tube Bag

Glove Box Handlebar Bag

Sector Stem Bag

Ninja Frame Bag

Moai Fork Bag

Obelisk Fork Bag

Overnighter Handlebar Bag

Flash PAK Saddle Bag

Understanding the materials we use for our products will help you care for them in an optimal way. Almost all our products use materials that have a DWR coating (Durable Water Repellent) on the outer layer. Over time this will wear off with factors like abrasion, fibre stress, prolonged UV exposure and detergents. This doesn't mean that we should totally shelter these products, but if we start with an understanding of what has the potential to cause damage then we can work around them. 

Zips

Using zips is pretty self explanatory, you pull it one way to open and the opposite way to close.

You can avoid stress on the teeth of the zip if you hold the product together when zipping it up. Pushing any obstructions away from the zip slider as you close it can avoid a jam, lightweight materials like jackets are notorious for this. Removing dirt, mud and particularly sand from the surface of the zip can reduce the risk of damage when opening and closing. All our on bike products use a YKK PU coated zip this offers a degree of water repellency, it's also easy to wipe down before use.

Zip lube is another great way to prolong the life of your zip. Yes, zip lube. Apply a small amount to the teeth of the zip occasionally for smoother running zips.

Spray Before You Play.

Before you use your skingrowsback product we recommend using a water shield spray, this not only repels water but will reduce the amount of dirt that sticks to the surface. Follow the instructions on the container for the best results.

 

We hope you have found this information useful and that your skingrowsback products exceed your expectations.

OVRN6-RC