0

Your Cart is Empty

TRANSITION 1.5 litre Hydration PAK

Reservoir
Built for durability and designed for versatility, the Transition 1.5 litre Hydration PAK  is engineered to meet the demands of your toughest adventures. The weather-resistant VX21 exterior offers exceptional protection, while the rugged nylon webbing ensures long-lasting strength. Inside, the 70D Ripstop Nylon interior adds further durability for your gear. Every detail is thoughtfully constructed with top-tier hardware, including FIDLOCK and DURAFLEX® components, plus YKK® AquaGuard zips for water-resistance. With Dyneema cord for the hanging handle and sternum winch, you get an added layer of strength that will withstand the demands of Endurance Racing. The large front zip pocket provides quick access to essentials like phones, transponders, or GPS devices, while the elastic mesh sleeve pocket and shock cord assembly gives you additional flexibility to carry more. Inside the Fidlock 1.5 litre HERMETIC Hydration Reservoir makes refills and cleaning easy with it's unique magnetic closer. The hose tip has an added layer of convenience with an interchangeable magnetic fastener. At the back, the Dyneema-shielded reflective rear panel offers increased visibility, so you can stay safe in low-light conditions. The 3D Air Mesh back pad with 10mm EVA provides a breathable, supportive fit, while the 3D Air Mesh shoulder straps—also reflective and Dyneema shielded—ensure comfort and safety. Additional features like shoulder compression and the magnetic ratchet sternum assembly bring added stability and ease of use. Two elastic mesh sleeves at the front offer convenient portage for gels making this piece as practical as it is tough. No matter where your journey takes you, the Transition Hydration PAK is built to go the distance. The TRANSITION 1.5 litre Hydration PAK is Manufactured to order in Melbourne Australia, please check our current production lead times.
Read More

YKK Zip

Magnetic Hardware

Weather Resistant

Australian Made

Light Weight

Stabilised

reflective

Reflective

Specs
  • Weather resistant VX21 exterior.
  • Nylon webbing.
  • 70D Ripstop Nylon interior.
  • FIDLOCK and DURAFLEX® hardware.
  • YKK® AquaGaurd zips.
  • Dyneema cord.
  • Large front zip pocket for rapid access to phones and transponders / GPS.
  • Elastic Mesh front sleeve pocket.
  • Dyneema shielded reflective rear panel.
  • 3D Air Mesh back pad with 10mm EVA.
  • 3D Air Mesh shoulder straps with Dyneema shielded reflective.
  • Shoulder compression.
  • Magnetic ratchet sternum assembly.
  • Dimensions: 210mm wide x 320mm high x 60mm deep. (11.8" x 19.6 x 7.8")
  • Volume: 2.4 litres.
  • Weight: 410g
  • Weight: 580g with Reservoir
  • Manufactured to order in Melbourne Australia
Installation
Returns and Exchanges

Hassle Free Returns for unused items. Contact us for more information. Please see the full Returns, Exchange and Cancelations policy here.

Dimensions
MediaListDrop
Care Instructions

If you can't get your skingrowsback product looking good with a simple hose down we recommend hand washing with a mild detergent if required, dry in the shade only.

Do not machine wash, machine dry, or iron. Avoid pressure washing and drying in direct sun light.

Here are some useful suggestions for maintaining your skingrowsback product. Even though the slightly over engineered nature of these products will mean they last a long time a couple of basic rules to follow will keep them lasting even longer.

Washing.

When it comes to washing there are two ways you can approach this. Primarily for our on bike products the most effective way is to use a hose to remove the bulk of the dirt and mud. Try to avoid using a pressure washer as this can do more harm than good. Different colours will have different results, the brighter the colour the more difficult it will be to keep clean for obvious reasons.

If the product you are washing has a stiff component to it please DO NOT wash it in the washing machine, this will cause the structure to be compromised. These products include:

Little Lunch Handlebar Bag

Lunchbox Handlebar Bag

Wide Boy Handlebar Bag

Amigo Top Tube Bag

Hot Dog Top Tube Bag

Hot Dog XL Top Tube Bag

Taquito Top Tube Bag

Glove Box Handlebar Bag

Sector Stem Bag

Ninja Frame Bag

Moai Fork Bag

Obelisk Fork Bag

Overnighter Handlebar Bag

Flash PAK Saddle Bag

Understanding the materials we use for our products will help you care for them in an optimal way. Almost all our products use materials that have a DWR coating (Durable Water Repellent) on the outer layer. Over time this will wear off with factors like abrasion, fibre stress, prolonged UV exposure and detergents. This doesn't mean that we should totally shelter these products, but if we start with an understanding of what has the potential to cause damage then we can work around them. 

Zips

Using zips is pretty self explanatory, you pull it one way to open and the opposite way to close.

You can avoid stress on the teeth of the zip if you hold the product together when zipping it up. Pushing any obstructions away from the zip slider as you close it can avoid a jam, lightweight materials like jackets are notorious for this. Removing dirt, mud and particularly sand from the surface of the zip can reduce the risk of damage when opening and closing. All our on bike products use a YKK PU coated zip this offers a degree of water repellency, it's also easy to wipe down before use.

Zip lube is another great way to prolong the life of your zip. Yes, zip lube. Apply a small amount to the teeth of the zip occasionally for smoother running zips.

Spray Before You Play.

Before you use your skingrowsback product we recommend using a water shield spray, this not only repels water but will reduce the amount of dirt that sticks to the surface. Follow the instructions on the container for the best results.

 

We hope you have found this information useful and that your skingrowsback products exceed your expectations.